High Pressure Marine Air Conditioning Systems

Specifications
 

Commercial quality water cooled units from 2-10 Ton with digital controls

 

7 Ton unit shown with 12-2" supply ducts

Primarily used on workboats, larger vessels, ships and aircraft, high-pressure systems eliminate the need to run water and condensate lines throughout the vessel which greatly reduces the installation expense, although you do lose independant temperature control in the individual spaces.

The conditioned air is compressed and transported throughout the vessel in relatively small diameter tubing to the different locations which may be quite distant from the air conditioning unit. Because the compressed air is warmer than uncompressed air, insulated ducting/tubing is usually not necessary - the air drops to design temperature only when it finally reaches atmospheric pressure in the individual cabins.

Shown below is a 20 Ton, vertical discharge unit:
 
                   
 
        
 
Approximate Specifications

Higher voltages and 50Hz available for an additional fee. Return air ducting usually necessary depending on unit location. Discharge ducting can be from 1" - 4" multiple ducts or a single 6-10" duct. Add about 12" to the overall height for a vertical discharge or length for a side discharge unit - about the same in width and length for return ducting if needed.
 Model
BTUs of cooling
 KW of electric heat
 Length in inches
Width in inches
 Height in inches
 Amps (cool)
 Amps (heat)
 Weight pounds
 FMAC2HPS
24,000
4
26
20
24
15@230/1
4KW
225
 FMAC3HPS
36,000
4
26
24
26
24@230/1
4KW
250
 FMAC4HPS
48,000
6
26
24
28
29@230/1
6-8KW
275
 FMAC5HPS
60,000
8
26
24
28
35@230/1
6-8KW
325
 FMAC7HPS
84,000
10
26
24
32
21@230/3
5-10KW
390
 FMAC10HPS
120,000
16
44
34
32
37@230/3
10-15KW
460